Application Steps for Home Users

Please follow the steps below when using Tinted Self-Tanning Lotion. When using the Whipped Bronze or the Bronzing Mist, follow the directions provided on the bottle.

Step 1: A.M. The day you begin your tan, shower or bathe using the Body Polisher in your hand to remove excess dull dry skin; shave if necessary. Apply Body Moisturiser over the entire body afterwards.

Step 2: P.M. Just before bed, apply Body Moisturiser to dry areas such as feet, ankles, knees, hands, elbows and hairline. This equalises skin porosity and helps keep palms from staining.

Step 3: You may choose to wear Latex (tight fitting) gloves to protect the hands. Smooth Self-tan evenly over body and face, rubbing in slightly, leaving it in a moist condition. Allow it to absorb into skin. Over rubbing will result in wiping off your tan.

For Best Results:

Start with the feet and work your way up the body, applying fully to each body area before moving on. Use Self-Tan Remover on your palms or wash them with soap. Lastly, apply Body Moisturiser to palms, and add a small amount of Self-tan to the back of your hands, rubbing them together to the tips of each finger. Please allow 10-15 minutes for the Self-tan to absorb before bedtime. Don't worry if it looks streaky whilst drying - this is normal. Colour will intensify in three hours. The following morning, shower to rinse off excess product and then moisturise. To achieve a base tan, please apply Self-tan three nights consecutively. Do not use Body Polisher on the 2nd and 3rd mornings. You should still shower, just don't scrub.

Maintaining Tan

To avoid spotting, moisturise daily - preferably in the mornings. Apply Self-tan two or three times weekly at night. Use the Body Polisher once or twice weekly.